Cabletron Systems SPECTRUM FRX6000, Maintenance Manual

Page: 29 / 78

Diagnostic Procedures 2-15
Action: None.
SNMP System Defaults file Read Error, System May Not Boot Correctly
Meaning: There is an error in the database file X25REC.DAT.
Action: Boot the node with a DOS diskette and copy
X25REC.DAT from the FRX6000 System Disk (part
of the installation set) to the directory omni4000 on
the hard disk.
SNMP System Defaults file X25REC.DAT does not exist, System May
Not Boot Correctly
Meaning: Self-explanatory.
Action: Boot the node with a DOS diskette and copy
X25REC.DAT from the FRX6000 System Disk (part
of the installation set) to the directory omni4000 on
the hard disk.
Subscriber file Read Error, System may not Boot Correctly
Meaning: There is an error in the database file SVCSUB.DAT.
Action: Boot the node with a DOS diskette and delete the
file, then reboot without the DOS disk and con-
figure new Subscriber parameters (described in the
User Guide).
Trap Routing Table file Read Error, System may not Boot Correctly
Meaning: There is an error in the database file TRPPAR.DAT.
Action: Boot the node with a DOS diskette and delete the
file, then reboot without the DOS disk and con-
figure new SNMP Trap Routing records (described
in the User Guide).
Unknown Host message received MID “n,” BID “n”
Meaning: An unknown message was received at the host dis-
patcher’s exchange from the specified port (
MID
)
and card (
BID
).
Action: Include the displayed values in an incident report to
Cabletron Systems Technical Support .