9W006 and 9W007 201
S
YSTEM
C
OMMANDS
Viewing Throughput Information
The actual bandwidth utilization, along with the current underload setting, is displayed for each
throughput sample. After 32 samples are displayed, the newest sample is displayed at position 32
and all other samples are shifted left one position.
Note:
If data compression is being used, an extra line will be displayed on the Connection
Monitor screen that will provide the compression and decompression ratios, and the
estimated throughput. The estimated throughput is calculated as follows:
est. thruput (in Kbits/second) = [(uncmp bits + undmp bits)/sample period)]/1000
Where uncmp bits = the number of uncompressed bits
undmp bits = the number of undecompressed bits
sample period = configured length of the sample period
T
HROUGHPUT
M
ONITOR
C
ONTENTS
# 1.
Indicates the site name for the connected site that was selected on the Connection Monitor
screen.
# 2.
Indicates the current bandwidth in place to the connected site. This number will be
updated as calls are added or released.
100
30
0
8 16 24 32
Throughput Monitor
Wide Area Network Bandwidth Utilization to site sitename @ current bandwidth Kbps
#1
#2
= UNDERLOAD BANDWIDTH
= ACTUAL BANDWIDTH UTILIZATION
Sample Rate (seconds): 03
Overload: Trigger 01 Window 02 Utilization (%) 10
Underload: Trigger 05 Window 10
Idle: Trigger 05 Window 05 Utilization (%) 10
Throughput Parameters
< Press F to Freeze data capture, Esc to return to Connection Monitor >
% of current
bandwidth
Samples
