Cabletron Systems SmartSTACK 10 ELS10-26, User Manual

Page: 77 / 116

Monitoring and Managing Your ELS10-26
4-7
To display all MAC addresses, at the LCM prompt:
1. Type
addresses display any
LCM responds with a list of all MAC addresses, their
associated ports, the type, age, and number of frames from and
to that address.
If you do not specify
any
, only the learned addresses are displayed.
To display a specific address, at the LCM prompt:
1. Type
addresses display <MAC-ADDRESS>
For example, if you typed,
addresses display
02:04:06:03:2a:43
, LCM would display the following
information:
You can display a range of addresses by using a net mask. This is
helpful when determining the status associated with stations
containing the same make of Ethernet network interface cards. At
the LCM prompt:
1. Type
addresses display <MAC-ADDRESS> <NET-MASK>
For example, to see all addresses that begin with 02:04:06, you
would enter:
addresses display 02:04:06:00:00:00 ff:ff:ff:00:00:00
Address Type Port
Age(secs)
Frames-From Frames-To
08:00:20:02:3a:44 Learned 3 26 1 0
Enter <CR> to continue, Ctrl-C to exit:
Address Type Port
Age(secs)
Frames-From Frames-To
02:04:06:03:2a:43 Learned 5
21 1181
73