3-20
Configuring Your ELS10-26
•
lxifTxStormCnt
– specifies the maximum number of multicasts
that can be broadcast within the given time.
•
lxiTxStormTime
– specifies the period of time that the maximum
number of multicasts can be broadcasted.
Refer to the ELS10-26 MIB Reference Guide for a complete listing
and description of MIB variables.
3.14 MODIFYING MIB VARIABLES
Specific instructions for controlling ELS10-26 operations,
modifying parameters, and so on, depend on the NMS you are
using. This manual provides instructions for using LCM
commands. However, LCM commands do not exist for all
configuration options. You may need to modify your configuration
using an NMS.
This section provides several common MIB variables you may
want to change. Refer to the ELS10-26 MIB Reference Guide for a
complete listing and description of MIB variables.
Each variable is first described in words, and is then identified in
MIB form, for example,
lxadminGetPass - {lxadmin 3}
. The Display
String line shows the range of values that can be used for the given
parameter. In each case, the DisplayString is a string of ASCII
characters.
3.15 SYSTEM CONTACT
The system contact parameter identifies the contact person who is
responsible for operating the ELS10-26. Typically, this parameter
includes the person’s name, company or division name, and
telephone number.
sysContact - {system 4}
DisplayString (SIZE (0..255))
Summary of Contents for SmartSTACK 10 ELS10-26
