Cabletron Systems SmartCell 6A000, Reference Manual

Page: 223 / 276

SmartCell 6A000/ZX-250 Reference Manual 2-199
Console Commands
Examples
switch_prompt # show svcbyid
CrossConn : 704
=====================================================================
Conn | Low | High | CreationTime
Id | Port Vpi Vci Type | Port Vpi Vci Type | (Hr:Min:Sec)
=====================================================================
704 A1 0 41 PTP A3 0 41 PTP 0: 5:20
switch_prompt # show svcbyid /d
CrossConnectNum(ALL) : 704
===========================================================
Cross Connect Id : 704
Low Port : A1
Low VPI : 0
Low VCI : 41
Low Cast Type : PTP
High Port : A3
High VPI : 0
High VCI : 41
High Cast Type : PTP
Admin Status : UP
Operation Status : UP
Creation Time (Hr:Min:Sec:MillSec) : 0:5:20:0
Traffic Type (Forward) : -
Early Packet Discard (Forward) : DISABLED
Cell Loss Ratio (Forward) : 0
Cumulative Cell Delay Variation (Forward) : 0
Max Cell Transfer Delay (Forward) : 0
Cumulative Cell Transfer Delay (Forward) : 0
Number of Cells Received in the Fwd Direction : 0
Number of Cells Dropped in the Fwd Direction : 0
Number of Epd Packets Dropped in the Fwd Direction : 0
Traffic Type (Backward) : -
Early Packet Discard (Backward) : DISABLED
Cell Loss Ratio (Backward) : 0
Cumulative Cell Delay Variation (Backward) : 0
Max Cell Transfer Delay (Backward) : 0
Cumulative Cell Transfer Delay (Backward) : 0
Number of Cells Received in the Bkw Direction : 0
Number of Cells Dropped in the Bkw Direction : 0
Number of Epd Packets Dropped in the Bkw Direction : 0
switch_prompt #