Cabletron Systems SmartCell 6A000, Reference Manual

Page: 86 / 276

2-62 SmartCell 6A000/ZX-250 Reference Manual
Console Commands
IPATMClient
Use IPATMClient (IP over (/) ATM client) to manipulate either local IP/ATM clients or IP/ATM clients acting as an
IP/ATM server, or if you want to configure an IP/ATM client on the IP/ATM server itself.
Operators
add, modify,
(
show client
)
Parameters
Input Parameter Description Value/Field Size Default
[ClientNumber] Number of the client. 0-127 0
[ServerType] IP/ATM server type. LOCAL,
EXTERNAL, NONE NONE
[ServerAddress] ATM address of the IP/ATM server. If
[ServerType]states NONE or LOCAL, then
accept the default. LOCAL means the client
also acts as an IP/ATM server for that VLAN
(virtual LAN). If [ServerType]states
EXTERNAL, enter the ATM address of the
external server. 13-20 byte hex-based/
Up to 59 characters NONE
[IPAddress] IP address of the client. dot decimal/
7-15 characters NONE
[NetMask] IP netmask of the client. This parameter defaults
to the appropriate netmask, based on the class of
IP address. Must be specified only if IP subnets
are being used. Calculated from the first two
high bits of the IP address, so it is either
255.0.0.0, 255.255.0.0, or 255.255.255.0. With
less address left, you have fewer bits to use to
define subnets. dot decimal/
7-15 characters 255.0.0.0,
255.255.0.0 or
255.255.255.0
[MTU] Maximum transfer unit assigned for this client. 64 to 10160 9180