INSTALLING THE SEH
SEH USER’S GUIDE
3-3
If the installation requires that the SEH be stacked, proceed to Section
3.2.5. Otherwise, continue by powering-up the SEH as described in
Section 3.3.
3.2.2 Rackmount Installation Requirements
To install the SEH in a 19-inch rack, Cabletron Systems offers an
accessory kit that includes rack mount brackets, mounting screws, and a
strain-relief bracket for cable management. The accessory kit is not
included with the SEH, but is purchased separately from Cabletron
Systems as part number SEH-ACCY-KIT.
Rack mounting the SEH involves:
•
Attaching the strain relief bracket
•
Attaching the rackmount brackets
•
Installing the SEH in a 19-inch rack
•
Interconnecting SEH units when applicable
Tools Required
•
Phillips Screwdriver
Materials Required
The following parts are included in the SEH-ACCY-KIT accessory kit.
Use Figure 3-2 to determine the correct brackets to use for this
application.
•
Strain relief bracket
•
Left and right rackmount brackets
•
8-32 x 1/4" panhead screws (4)
•
8-32 x 3/8" panhead screws (4)
Use only the parts listed above to rack mount the SEH. The
accessory kit includes other items not used in this application.
Use of the wrong brackets or screws may result in damage to
the unit or cause electrical shock.
SEH Book Page 3 Tuesday, March 19, 1996 4:12 PM
