background image

Chapter 4: Local Management

4-2

HSIM-G01/G09 User’s Guide

Figure 4-1

Typical Hierarchy of Local Management Screens

4.2

GIGABIT ETHERNET CONFIGURATION SCREEN

The Gigabit Ethernet Configuration screen allows the user to support the 
HSIM-G01 and the HSIM-G09. 

The screen (see 

Figure 4-2

) displays the type of interface used 

(HSIM-G01 or HSIM-G09), the device or module in which the HSIM-G 
is installed, and the port number of the module in which it is installed. 
The link status, current operating mode, and advertised ability are also 
displayed. The screen allows the user to enable or disable 
Auto-Negotiation and Advertised Ability.

To access the Gigabit Ethernet Configuration screen, navigate through the 
Local Management screens until the Module or Device Specific 
Configuration Menu
 screen displays. Use the arrow keys to highlight the 
High Speed Interface Configuration menu item and press ENTER. The 
Gigabit Ethernet Configuration screen, 

Figure 4-2

, displays.

Password

Module
Configuration
Menu

2398-hierarch

Module Specific
Configuration Menu

General Configuration

SNMP Community Names

SNMP Traps

Switch Configuration

Network Tools

Chassis
Menu

Chassis Configuration

SNMP Community Names

SNMP Traps
Chassis Environmental

Main
Menu

Module
Selection

SmartTrunk Configuration

Port Redirect
Function

System
Resources

High Speed
Interface
Configuration

Flash Download

Broadcast
Supression

Module
Statistics
Menu

Switch Statistics

Port Redirect Function

RMON Statistics

Interface Statistics

Summary of Contents for HSIM HSIM-G01





































Reviews: