manualshive.com logo in svg

Cabletron Systems HSIM HSIM-G01, User Manual, Page: 14 / 36

Share
Download
Cabletron Systems HSIM HSIM-G01 User Manual Download Page 14

 

Chapter 1: 

 

Introduction

 

1-4

HSIM-G01/G09 User’s Guide

 

1.4

OVERVIEW

 

The HSIM-G extends the functionality of certain Cabletron Systems 
interface modules or standalone devices by providing high-speed uplink 
capability through Gigabit Ethernet technology. 

Section 1.4.1

 and 

Section 1.4.2

 give information on some of the features of the HSIM-G.

 

1.4.1

Connectivity

 

The HSIM-G01 module supports 1000Base-SX, providing one SC fiber 
optic connector for 50 or 62.5 micron multimode fiber optics. The 
HSIM-G09 module supports 1000Base-LX, offering one SC fiber optic 
connector for 50 or 62.5 micron multimode fiber optics, or 10 micron 
single mode fiber optics.

The HSIM-G only operates in full duplex mode.

 

1.4.2

LANVIEW Diagnostic LEDs

 

Cabletron Systems provides a visual diagnostic and monitoring system 
called LANVIEW. The HSIM-G LANVIEW LEDs help you quickly 
identify transmit and receive status. 

Chapter 3

 provides information on all 

HSIM-G LEDs.

 

1.5

RELATED DOCUMENTATION

 

Any related documentation, such as manuals for a host platform, can be 
obtained on the World Wide Web in Adobe Acrobat Portable Document 
Format (PDF) at the following site: 

http://www.cabletron.com/

Summary of Contents for HSIM HSIM-G01





































Reviews:

No comments