SNMP COMMUNITY NAMES SCREEN
EMME USER’S GUIDE
Page 5-21
5.9
SNMP COMMUNITY NAMES SCREEN
Figure 5-6 shows the SNMP Community Names screen. The network
manager may control Local Management access by establishing three (3)
passwords. Each password controls varying levels of access to EMME
Local Management.
Figure 5-6. The Community Names Screen
The following list describes each of the three levels of access:
•
super-user: Allows full management privileges
•
read-write: Allows edit of some device configuration parameters not
including changing community names
•
read-only: Allows reading of device parameters not including
community names
In order to perform any operations on the SNMP Community Names
screen, the user must have used the super-user community name at the
User Password prompt when initiating the Local Management session.
SNMP COMMUNITY NAMES
Community Name
public
public
public
Access Policy
read-only
read-write
super-user
SAVE
RETURN
051449
Event Message Line
EMME Local Management
Flash Image Version: XX.XX.XX
