Appendix B: EMME OIDs
Page B-8
EMME USER’S GUIDE
B.6
BRIDGING
The following OID is used to enable and disable the interface for the
bridging function.
dot1dstpPortEnable
Description:
The enabled/disabled status of the port.
Object Identifier:
1.3.6.1.2.1.17.2.15.1.4
Data Type:
Integer
Values:
1 = enable
2 = disable
Access Policy:
read-write
B.7
TRUNK PORT SECURITY
The following OID is required if security is not desired on a trunk port.
The user must force the port to be a trunk port before locking the port via
the module or channel. Failing to do this will cause the port to become
locked out when the third address is seen on the trunk port.
rptrPortSrcAddrForceTrunk
Description:
When this object is set to Force, it places the
port into a Trunk topology state whether or not
the network traffic warrants such a state. When
this object is set to NoForce, it allows the port
to assume the topological state it would
naturally assume based on the network activity
across it. When read, this object reports the
current setting.
Object Identifier:
1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.4
Data Type:
Integer
Values:
1 = NoForce
2 = Force
Access Policy:
read-write
