Cabletron Systems CSX200 CyberSWITCH, User Manual

Page: 51 / 261

CSX200 Family User’s Guide 37
5
CSX200 Configuration with QuickSET
This chapter provides step-by-step instructions for configuring the CSX200 using QuickSET.
\
Normally, QuickSET automatically establishes a communication link with the CSX200 being
configured. However, under certain circumstances, QuickSET may not be able to locate the
CSX200 automatically. In this case, the IP Address window shown in
Figure 12 displays.
Figure 12 IP Address Window
Enter the IP address of the CSX200 in the appropriate field and the password if applicable (the
default password is public). Click on the OK button and QuickSET locates the CSX200 on the
network and displays the First Introductory window shown in
Figure 13 .
NOTE
Before configuring the device, you must set up your computer based on the READ ME
FIRST! documentation included with the product and installed the CSX200 based on
the
QuickSTART Guide located in the QuickSET CD case.
The CSX200 must have a WPIM installed before you can begin configuring the device.
NOTE
The QuickSET version number shown on each window in this chapter may not be the
version number of QuickSET running on your system.