Cabletron Systems 2H23-50R, User Manual

Page: 66 / 182

Chapter 5: Local Management
5-16 2H23-50R/2H33-37R User’s Guide
The following briefly explains each screen that is accessible from the
Device Configuration Menu screen:
GENERAL CONFIGURATION
The General Configuration screen allows the user to monitor and
configure operating parameters for the 2H23-50R or 2H33-37R. For
details, refer to
Section 5.7 .
SNMP COMMUNITY NAMES
The SNMP Community Names screen allows the user to enter new,
change, or review the community names used as access passwords for
device management operation. Access is limited based on the password
level of the user. For details, refer to
Section 5.8 .
SNMP TRAPS
The SNMP Traps screen provides display and configuration access to the
table of IP addresses used for trap destinations and associated community
names. For details, refer to
Section 5.9 .
SWITCH CONFIGURATION
The Switch Configuration screen provides the basic setup options for
customizing the operation of a switch device in the network. For details,
refer to
Section 5.10 .
SMARTTRUNK CONFIGURATION
The SmartTrunk Configuration screen allows the user to logically group
interfaces to aggregate high speed uplinks. For details, refer to
SmartTrunk User’s Guide.
DEVICE SPECIFIC CONFIGURATION
The Device Specific Configuration Menu screen allows the user to select
screens to configure ports or check system resources specific to the
2H23-50R or 2H33-37R. For details, refer to
Section 5.11 .