Cabletron Systems 2000, Getting Started Manual, Page: 59 / 92

SmartSwitch Router 2000 Getting Started Guide 59
Chapter 3
Software
Installation and
Setup
This chapter provides the following software installation and basic setup procedures:
• Powering on and booting the software
• Starting the Command Line Interface (CLI)
• Setting basic system information
• Setting up SNMP community strings
• Setting up passwords
• Setting the DNS domain name and address
• Setting SYSLOG parameters
• Loading system image software
• Loading the boot PROM software
• Activating configuration changes and saving the configuration file
Powering On and Booting the Software
To power on the SSR 2000 and boot the software:
1. Make sure any exposed expansion slots are free of foreign objects, such as tools or
your hands, and are covered with coverplates.