background image

DOCSIS 1.0/ 1.1 Equivalent Cable Modem

 

DHCP 

Protocol used to automatically assign various network settings, most notably IP 
addresses 

 
DHCP Client Capabilities 

The Dynamic Host Configuration Protocol (DHCP) provides centralized management 
of the Transmission Control Protocol/Internet Protocol (TCP/IP) client configurations, 
including the IP address, gateway address, Domain Name Server (DNS) address and 
more.    The DHCP Client enables the Office Cable Modem to acquire TCP/IP settings 
(such as the IP address, gateway address, and DNS address) from the ISP. This is ideal 
when one TCP/IP address is provided by the ISP and this address may change from 
time to time, as is the case with many cable modem Internet accounts. 

 
DNS 

Domain Name System. Automated system used to translate computer names into IP 
addresses. A DNS server is used to look up a name and provide its address to the 
requesting computer. 

 
DOCSIS 

Data Over Cable Service Interface Specification. A standard that defines interface 
requirements for cable modems involved in high-speed data distribution over cable 
television networks. 

 
Downstream 

Indicates the direction of flow of a data stream from the cable headend to the user’s 
computer. 

 
Duplex Tuner 

A tuner that processes both upstream and downstream signals. 

 
Encryption 

The scrambling of a signal by means of an algorithm, to prevent unauthorised 
monitoring of the message. 

 

Ethernet 

A network technology that employs a bus topology in which all computers attach to a 
single cable similar to the stops on a bus line. The Ethernet technology is an accepted 
worldwide standard whose characteristics are defined by the IEEE 802.3 standards 
committee. 
 

F connector 

A type of coaxial connector, labeled RF on the rear of the cable modem that connects 
the modem to the cable system. 

 
Firewall 

A software or hardware system that prevents unauthorized outside access, theft, 
deletion, or modification of information stored on a local network. Typically, this 
unauthorized access would be via an organization's Internet connection. 
 
 

25 

Summary of Contents for DOCSIS Cable Modem


































Reviews: