56K Faxmodem
Quick Installation Guide
R24.0662.00
rev 1.4 7/07
I n t r o d u c t i o n
Package Contents
Physical Features
LEDs
For more detail on the LEDs, see the
User Guide
on the USRobotics Installation CD-
ROM.
System Requirements
I n s t a l l a t i o n
Step One: Prepare for Installation
1. Uninstall all other modems that are installed on your computer. For instructions,
refer to the documentation for your previous modem.
2. Unplug all telephone and power cords connected to your previous modem(s).
3. Shut down your computer and power it off.
4. Locate the serial port on the back of your computer. To find the serial port, look
for a port labeled COM, MODEM, RS-232,
, or SERIAL.
Do not use the
AUX, GAME, LPT, or PARALLEL ports.
Step Two: Connect the Modem to the Computer
Connect one end of the serial modem cable to modem and the other end to your
computer’s serial port.
Step Three: Connect the Modem to an Analogue Telephone Line
1. Plug one end of the telephone cord into the
jack on the modem.
2. Plug the other end into an analogue telephone wall jack.
3. To connect a telephone through the modem, plug the telephone’s cord into the
modem’s
jack.
Step Four: Power Up the Modem
1. Plug the power adapter into the jack on the modem and the other end into an
electrical outlet.
2. Turn on the modem using the power switch on the front
of the modem. The
CS
LED should light.
If the
CS
LED does not light or other LEDs light, make
sure that only DIP switches
3
,
5
, and
8
are in the on
(down) position.
3. Turn on your computer.
Step Five: Install the Modem Drivers
Windows Vista, XP and 2000
You must be logged in as an administrator in order to properly install the new
modem.
When you turn your computer on, Windows automatically detects the modem and
installs a generic driver. You will need to update it with the USRobotics driver to sup-
port full V.92 features and the additional software tools for your modem.
1. Insert the USRobotics Installation CD-ROM to install the
USRobotics driver.
If the CD doesn't start automatically, start it manually as follows:
A.
Windows Vista
: Click Windows
Start
>
Computer
.
Windows XP
: Click Windows
Start
>
My Computer
.
Windows 2000
: On the desktop, double-click
My Computer
.
B. Double-click the CD drive.
2. If the Auto Play window appears, click
Run autorun.exe
. If prompted by User
Account Control, click
Continue
.
3. If prompted, select your preferred language. If asked to read the license agree-
ment, read the agreement and click
Yes
.
4. Click
Install Modem
, and follow the on-screen instructions to install the driver
for the modem. If prompted, click
OK
.
!
Windows Vista:
If prompted by Windows Security, click
Install
.
1
!
Windows XP
: If a Software or Hardware Installation warning appears,
click
Continue Anyway
.
1
!
Windows 2000
: If a Digital Signature Not Found window appears,
click
Yes
.1
C o n g ra t u l a t i o n s .
You have successfully completed the installation procedure.
Please register your 56K Faxmodem at
www.usr.com/productreg/
.
Windows Me
You must be logged in as an administrator in order to properly install the new
modem.
When you turn your computer on, Windows automatically detects the modem and
installs a generic driver. You will need to update it with the USRobotics driver to sup-
port full V.92 features and the additional software tools for your modem.
1. Insert the USRobotics Installation CD-ROM to install the
USRobotics driver.
2. If prompted, select your preferred language. If asked to read the
license agreement, read the agreement and click
Yes
.
3. Click Windows
Start
>
Settings
>
Control Panel
.
4. Double-click
System
.
5. On the
Device Manager
tab, double click
Modem
to expand the entry.
6. Double-click the
Sportster V.90 56K Faxmodem
.
7. On the
Driver
tab, click
Update Driver
.
8. Select
Automatic search for a better driver (Recommended)
and click
Next
.
9. Click
Finish
to complete the installation.
C o n g ra t u l a t i o n s .
You have successfully completed the installation procedure.
Please register your 56K Faxmodem at
www.usr.com/productreg/
.
Windows 98
1. Turn on your computer. The Found New Hardware Wizard will detect your
modem.
2. Insert the USRobotics Installation CD-ROM to install the
USRobotics driver.
3. In the Found New Hardware Wizard, click
Next
.
4. Select
Search for best driver for your device (Recom-
mended)
and click
Next
.
5. Select
CD-ROM drive
and click
Next
.
6. Click
Next
, then click
Finish
to complete the installation.
C o n g ra t u l a t i o n s .
You have successfully completed the installation procedure.
Please register your 56K Faxmodem at
www.usr.com/productreg/
.
Windows 95B
1. Turn on your computer. The Update Device Driver Wizard or Found New Hard-
ware Wizard will detect your modem.
2. Insert the USRobotics Installation CD-ROM to install the
USRobotics driver.
3. In the Update Device Driver Wizard or Found New Hardware
Wizard, click
Next
and follow the on-screen instructions.
If the Update Device Driver Wizard or New Hardware Found
window does not immediately detect the correct modem, per-
form the following steps:
A. Select
Driver from disk provided by manufacturer
and click
OK
.
B. Type
D:\
and click
OK
, where
D
is the drive letter assigned to your CD-
ROM drive.
C. Click
OK
to continue the installation.
D. If prompted, click
Finish
to complete the installation.
C o n g r a t u l a t i o n s .
You have successfully completed the installation procedure.
Please register your 56K Faxmodem at
www.usr.com/productreg/
.
Windows NT 4.0
You must be logged in as an administrator in order to properly install the new
modem.
When you turn your computer on, Windows automatically detects the modem and
installs a generic driver. You will need to update it with the USRobotics driver to sup-
port full V.92 features and the additional software tools for your modem.
1. Insert the USRobotics Installation CD-ROM to install the
USRobotics driver.
2. If prompted, select your preferred language. If asked to read the
license agreement, read the agreement and click
Yes
.
3. Click Windows
Start
>
Settings
>
Control Panel
.
4. Double-click
Modems.
5. Click
Add
. When the
Install New Modem
screen appears, click
Next
to have
Windows detect a standard modem.
6. Click
Change
.
7. Click
Have Disk
. Type
D:\
and click
OK
, where
D
is the drive letter assigned to
your CD-ROM drive.
8. Select
U.S. Robotics 56K FAX EXT
and click
OK
.
9. Click
Next
.
10. Click
Finish
to complete the installation. When you see the
Modems
Properties
tab, you will see the COM port that is assigned to your modem.
11. Click
Close
. If the
System Settings Change
window appears, click
Yes
to restart
your computer.
C o n g r a t u l a t i o n s .
You have successfully completed the installation procedure.
Please register your 56K Faxmodem at
www.usr.com/productreg/
.
Additional Software Tools (optional)
For your convenience, the USRobotics Installation CD-ROM provides additional
optional software tools that complements your modem, including the following:
"
Instant Update
automatically notifies you of any available updates for your
modem’s firmware.
"
Internet Call Notification
enables the V.92 feature “Modem On Hold”, which
suspends your Internet connection when the modem detects an inbound tele-
phone call.
2
For more information on using Internet Call Notification, see the
User Guide on the USRobotics Installation CD-ROM.
"
PhoneTools
software lets you send and receive faxes.
To see the additional software tools for your modem, select
Software
on the USRo-
botics Installation CD-ROM.
Tr o u b l e s h o o t i n g
General
This procedure addresses a number of symptoms that you might experience with
your modem:
1. Verify that the cables are connected correctly. This includes all cables connecting
the telephone line, the modem, and your computer.
2. Refer to the LED descriptions and then check the LEDs on the modem to make
sure you are receiving power and that are no errors.
3. If possible, test your modem with a different phone cord and/or wall jack. .
4. Make sure you are not using a Null Modem cable or adapter.
5. Make sure the DIP switches on the back of your modem are set correctly. DIP
switches
3
,
5
, and
8
should be in the on (down) position.
6. Shut down and restart your computer.
7. If you still have trouble with the modem, follow these steps to determine whether
it was installed correctly:
Windows Vista
1. Click Windows
Start
>
Control Panel
.
2. Click
Hardware and Sound
.
3. Click
Phone and Modem Options
and then click the
Modems
tab.
You should see
U.S. Robotics 56K FAX EXT PnP
and a COM port setting.
If you do not see a description of your modem, repeat the installation proce-
dure.
4. On the Modems tab, select the description of your new modem and click
Properties
.
5. Click the
Diagnostics
tab and then click the
Query Modem
button.
If you see a series of commands and responses from the modem, the installa-
tion was successful.
If you do not see a description of your modem the installation was not suc-
cessful; repeat the installation procedure.
"
USRobotics 56K Faxmodem
"
USRobotics Installation CD-ROM
"
Telephone cable
"
Power adapter
"
Quick Installation Guide
LED
Name
State
Condition
AA
Auto Answer
On
Answering a call
Blinking
Incoming call
CD
Carrier
Detect
On
Receiving carrier signal from remote modem
RD
Received
Data
Blinking
Sending or passing data with remote modem
SD
Send Data
On
Receiving a DTR signal from computer
TR
Terminal
Ready
On
DTR override is on
CS
Clear to Send On
Modem is on and ready to send data
ARQ/
FAX
Error Control
On
Successfully established an error control con-
nection
Blinking
Transmitting data to remote modem
"
Windows Vista™
, Windows
®
XP, 2000, Me, 98, 95B
or NT 4.0
"
CD-ROM drive
"
500 MHz Processor or higher
"
128 MB RAM
"
56K Compatible analogue telephone line
"
RS-232 Serial modem cable
V.92
OFF
ON
AA
CD
RD
SD
TR
CS
ARQ/FAX
Power switch
LEDs
1
2
3
4
5
6
7
8
Line to
wall jack
Line to
telephone
DIP
switches
Serial Port
Power
jack
Volume dial
C a u t i o n :
The 56K Faxmodem must be plugged in to an analogue phone line
only. Plugging your 56K Faxmodem in to a digital phone line may
damage the modem.
Most office phones are wired through digital lines. Be sure you
know what type of line you have.
N o t e :
This product is intended to have power supplied by a Listed Direct Plug-in
Power Adapter marked Class 2 and rated 9V AC, 1000 mA.
1 2 3
4 5
6 7 8
1 2 3
4 5
6 7 8
1 2 3
4 5
6 7 8
1
2
3
4
5
6
7
8
OFF
ON
1 USRobotics has throughly tested this driver in conjunction with the supported hardware and has verified its com-
patibility with Windows Vista, XP and 2000.
2 In order to use the “Modem On Hold” feature, you must subscribe to Call Waiting service with your telephone
service provider.
1
2
3
4
5
6
7
8
OFF
ON
