background image

Vonage V-Portal User Guide 

Getting to know your V-Portal 

 

 

 

 

 

Ever hear the term user friendly? Well, the Vonage V-Portal defines the term. From the LCD 
Display messages to the color coded ports on the rear panel, the V-Portal is friendly to the user ... 
YOU. Installation and use is easy! 

The V-Portal can connect up to 2 Vonage digital phone lines through your high-speed Internet 
connection. Just plug the blue Ethernet cable from the V-Portal into your broadband modem and 
use the two green RJ-11 telephone ports to plug in your existing phones or fax machine. The 
Vonage V-Portal allows you to use your Internet connection for your computer and your phones 
at the same time, and because it’s Vonage, you get clear digital phone sound quality. 

The V-Portal’s built-in single-port wired router supports your PC or home network connection. 
You can plug one computer directly into the yellow Ethernet (LAN) port of your V-Portal or build 
your own home network (often referred to as a LAN, "Local Area Network") by plugging in another 
router or switch and connecting network devices, such as computers or printers. 

 

 

 

View the Terms of Service by visiting the Vonage website at www.vonage.com/tos. Pay particular attention to 

Section 11 which explains limitations on Warranty, Remedy and Liability. 

1

Summary of Contents for V-Portal

















































































































Reviews: