4 Bay MULTI HDD BOX User Guide
12
RAID Rebuild
RAID rebuild can only be performed under RAID3/5/10 configuration. Please follow the
following steps to start rebuilding.
Step 1: Power Off,
Step 2: Remove failed HDD.
Step 3: Install a functional HDD.
Step4: Turn on the power, and it’ll start rebuilding
- LED Configuration on Rebuild process
RAID 3/5
: 4 LED blinks irregularly
RAID 10:
HDD1/2: LED 1/2 blinks irregularly on rebuild
HDD3/4: LED 3/4 blinks irregularly on rebuild
LED Activity Chart: this chart describe LED activity under RAID rebuild process
●
Constant On
◎
Blinks Irregularly
(HDD1)
LED 1
(HDD2)
LED 2
(HDD3)
LED 3
(HDD4)
LED 4
RAID 3
◎
◎
◎
◎
RAID 5
◎
◎
◎
◎
RAID 10
HDD1/2
◎
◎
●
●
HDD3/4
●
●
◎
◎
Rebuild Complete(Online)
●
●
●
●
Rebuild Complete(Offline)
Note:
1. Rebuild speed 250GB/HR
2. Anytime when a HDD failure is detected, the LED blinks at a constant pace.
3. Online: Power cable is connected to the device, USB or eSATA cable is connected to PC.
Offline: Only power cable is connected to the device.
Summary of Contents for 3.5"
