“Fine Tune by Percentage” will provide the option to further
adjust the position and area defined in .
For outward expansion For inward reduction
By percentage, users need to determine what will be the ref-
erence. There are two choices for this part: "Specified Area"
and "Fulll Input". Normally, "Specified Area" will work more
appropriately while users are dealing with panel bezels;
because the overlapped masking area will be close the
specified area instead of full input video!
"Fine Tune by Pixel" offers similar approach to adjust the po-
sition and area of the output channel.
The idea behind this section is the same to “Fine Tune by Per-
centage”. The difference is that the adjustment is based on
pixels. Users can therefore adjust the output channel area
pixel wise.
17
5
6
4
Using the TV wall Calculator
1.
Verify that the sequence of the ports are connected as shown below:
(We recommend this sequence, but you can connect the sequence the way it works best for you)
One screen will show 1/4 image for the default settings of the DVP14
