caberQU C2C v3.2, Manual

Page: 5 / 12

4. Measurement
Insert both ends of a USB C to USB C cable into the C2C caberQU. This will make each LED which has any of the
pins of connector
II connected to connector I light up. Pins which have a resistor attached in the cable internally
will make the corresponding LED light up less intense.
The cable tester can not detect short circuits in between different pins, special function cables including diodes or
any cables with active electronics.
The C2C caberQU does not consume any power while no cable is connected.
I
II
top view
C2C caberQU
5