Caberg Just SpeakS User Manual Download Page 9

Page: 9 / 14

English

JUST SPEAK S

INTERCOM CONVERSATION

Pairing with Other Just Speak S Headsets for

Intercom Conversation

The Just Speak S can be paired with another headset for Bluetooth
intercom conversation.
1. Turn on the two Just Speak S headsets (A and B) that you would like to

pair with each other.

2. Press and hold the (-) Button of the headset A and B for 5 seconds until

the red LEDs of both units start to flash rapidly. You will hear a voice
prompt saying “

Intercom pairing

”.

3. Simply press the (-) Button of either of the two headsets A or B (It doesn’t

matter that you choose A or B) and wait until the LEDs of both headsets
turn to blue and intercom connection is automatically established. The
two Just Speak S headsets A and B are paired with each other for
intercom conversation. If the pairing process is not completed within
one minute, the Just Speak S will return to stand-by mode.

6. INTERCOM CONVERSATION

Starting and Ending Intercom Conversation

1. You can start an intercom conversation with your intercom friend by

pressing and holding the (-) Button for 1 second.

2. To terminate an intercom conversation, press and hold the (-) Button for

1 second again.

Intercom and Mobile Phone Call

1. When you have an incoming mobile phone call during an intercom

conversation, you will hear a ring tone. You can choose whether to 1)
answer the mobile phone call and stop the intercom conversation, or 2)
reject the phone call and stay on the intercom conversation.
• To answer the phone call and stop the intercom conversation, press

the (+) Button. When you hang up the phone call, the intercom will
automatically be recovered.

• To reject the phone call and stay on the intercom conversation, press

and hold the (-) Button for 2 seconds until you hear a beep.

Unlike other motorcycle Bluetooth headsets, this prevents a user from
being dropped out of an intercom conversation by an incoming mobile call.
2. When you have an incoming intercom call during a mobile phone call,

you will hear 4 high tone beeps, alerting you that there is an incoming
intercom call. You will also hear a voice prompt saying “

Intercom

requested

”. In this case, the intercom call does not override the mobile

phone call because intercom has lower priority than mobile call. You
have to hang up the mobile phone call to make or receive an intercom
call.

Intercom Failure

When you try to start an intercom conversation with an intercom friend who
is already having a mobile phone call with another person, you will hear a
low tone double beep signifying a busy signal. You will also hear a voice
prompt saying “

Intercom failed, try again later

”. In this case, you have to

try again later. On the other hand, the intercom friend will hear 4 high tone
beeps alerting them that there is an incoming intercom call.

Intercom Reconnection

If your intercom friend goes out of range while having an intercom
conversation, you may hear static noise and eventually the intercom will be
disconnected. In this case, the Just Speak S automatically tries to reconnect
the intercom every 8 seconds. You will hear high tone double beeps until the
intercom is reestablished. If you don’t want to make a reconnection, press
and hold the (-) Button for 1 second to stop the attempt.

Just Speak S CONFIGURATION SETTING

You can set the configuration of the Just Speak S by the voice menu
instruction as below.
1. To enter into voice configuration menu, press and hold the (+) Button

for 10 seconds until the LED shows solid blue and you hear high tone
double beeps. You will hear a voice prompt saying “

Configuration

menu

”.

2. Press the (+) Button to navigate between menus. You will hear voice

prompts for each menu items as below.

3. You can enable or disable the feature or execute the command by

pressing the (-) Button.

4. If any button is not pressed within 10 seconds, the Just Speak S will exit

the configuration and goes back to standby.

5. If you want to exit the configuration immediately, press and hold the (+)

Button until you hear a voice prompt, “