background image

18

19

English

JUST SPEAK S

JUST SPEAK S

The voice prompts for each menu item are as below:

(1) VOX phone

(2) Voice prompt

(3) Delete all pairings

(4) Factory reset

(5) Exit configuration

Enabling/Disabling Voice Activated Phone Answering

Voice Prompt

“VOX phone”

Factory Default

Enable

Enable / Disable

Press the (-) Button

If this feature is enabled, you can answer incoming calls by simply saying a 
word loudly enough, unless you are connected to intercom. For example, 
when you hear a series of beeps for an incoming call, you can answer the 
phone by saying “

Hello

” or any other word loudly. However, the phone VOX 

feature does not work if you are connected to intercom. This is enabled 
from the factory but you can disable this. If this mode is disabled, you have 
to press the (+) Button to answer an incoming call.

Enabling/Disabling Voice Prompts

Voice Prompt

“Voice prompt”

Factory Default

Enable

Enable / Disable

Press the (-) Button

You can disable voice prompts by configuration setting, but the following 
voice prompts are always on.
-   Voice prompts for configuration setting menu
-   Voice prompts for battery level Indicator
-   Voice prompts for factory reset

Delete All Bluetooth Pairing Information

Voice Prompt

“Delete all pairings”

Factory Default

N/A

Execute

Press the (-) Button

To delete all Bluetooth pairing information of the Just Speak S, press and 
hold the (+) Button until you hear a voice prompt, “

Delete all pairings

”, 

and press the (-) Button to confirm.

Reset to Factory Default Setting

Voice Prompt

“Factory reset”

Factory Default

N/A

Execute

Press the (-) Button

To restore factory default settings on the Just Speak S, press and hold 
the (+) Button until you hear a voice prompt, “

Factory reset

”. Press the 

(-) Button to confirm. The Just Speak S powers off with a voice prompt, 

Headset reset, goodbye

”.

Exit Voice Configuration Menu

Voice Prompt

“Exit configuration”

Factory Default

N/A

Execute

Press the (-) Button

To exit voice configuration menu and get back to stand-by mode, press and 
hold the (+) Button until you hear a voice prompt, “

Exit configuration

”. 

Press the (-) Button to confirm.

Press (+) Button

Press (-) Button

“Vox phone”

Enable / disable

“Voice prompt”

Enable / disable

“Delete all pairings” 

Execute

“Factory reset”

Execute

“Exit configuration”

Execute

Voice Configuration Menu & Button Operations

Summary of Contents for Just SpeakS















Reviews: