12
13
English
JUST SPEAK S
JUST SPEAK S
JUST SPEAK S
1st Mobile Phone
2nd Mobile Phone
Mobile Phone
Pairing
HFP
+
A2DP
HFP
Multipoint
Pairing
Multipoint Mobile Phones Pairing
Bluetooth Stereo Device Pairing
1. If the Bluetooth stereo device is integrated with the mobile phone
such as smartphones, you don’t need to pair the Just Speak S with it
separately. When the Just Speak S is paired with the mobile phone, it is
also paired as a stereo music device.
2. If you have a stand alone Bluetooth stereo device, follow the pairing
procedure separately. The procedure is the same as the procedure of
“Mobile Phone Pairing”.
Note:
1. If Bluetooth connection between the headset and a mobile phone is
disconnected, press and hold the (+) Button for 3 seconds to recover the
Bluetooth connection immediately.
2. If Bluetooth connection between the headset and a media player is disconnected,
press and hold the (+) Button for 1 second to recover the Bluetooth connection
and play.
Bluetooth GPS Navigation Pairing
You can listen to voice instruction from Bluetooth GPS navigation. Some
GPS systems use mobile phone profile (HFP, Hands-Free Profile) and others
use stereo music profile (A2DP, Advanced Audio Distribution Profile). Most
motorcycle specific GPS systems use mobile phone profile for turn-by-turn
voice instruction. You can simultaneously use a mobile phone and a GPS
which uses mobile phone profile by one of the following procedures.
Multipoint GPS Pairing
If you use GPS only for turn-by-turn voice instructions, not for Bluetooth
stereo music streaming, multipoint pairing is recommended for the GPS
connection. Multipoint Bluetooth pairing allows the Just Speak S to connect
two HFP devices at the same time: mobile phone and GPS navigation.
Follow the steps below to pair the GPS using the multipoint pairing.
1. Turn on the headset and press and hold the (-) Button for 5 seconds until
the red LED is rapidly flashing and you hear multiple beeps.
2. Within 2 seconds, press and hold the (+) Button for 1 second, then
the LED turns to blue flashing and the beeps turn to high tone double
beeps. You will hear a voice prompt saying “
Multipoint pairing
”.
3. Search for Bluetooth devices on the GPS navigation screen. Select the
Caberg Just Speak S in the list of the devices detected on the GPS.
4. Enter 0000 for the PIN.
5. The GPS confirms that pairing has completed and the Just Speak S is
ready to use. You will hear a voice prompt from the Just Speak S saying
“
Your headset is paired
”.
6. If the pairing process is not completed within three minutes, the Just
Speak S will return to stand-by mode.
The pairing diagram for multipoint GPS pairing is shown in the figure below.
GPS Navigation
JUST SPEAK S
Mobile Phone
Mobile Phone
Pairing
HFP
+
A2DP
HFP
Multipoint
Pairing
Multipoint GPS Pairing
