9
2.2
Mounting the Applicator
!
Attention!
Disconnect the printer from the power before installing or removing the applicator.
2
1
4
3
5
Figure 5 Mounting the applicator
Insert the pins (3) of the applicator (5) to the drill holes (1) on the printer.
Push the applicator to the printer to connect the applicator plug with the peripheral port (2) of printer.
Tighten the screw (4) to fix the applicator.
i
Note!
The wrapper unit can be pivoted from the printer to insert materials and for service work.
2
1
Figure 6 Pivoting the wrapper unit
Loosen the knurled screw (1).
Pivot the wrapper unit (2) from printer.
When finished, pivot back the wrapper unit and tighten knurled screw.
