14
14
5.3
Labelling
5
2
3
1
4
Figure 12 Insert product
Set the end of the product (2) to the stop (3).
Grab the product with thumb and index finger of right hand on the outside of the chassis (1). At the same time,
hold the product with your left thumb and index finger 1 to 2 centimeters distant from the chassis.
Keep this grip to guide the product into the centering panels. At this, the thumb and index finger of the right hand
touch the centering panel (5).
Close the centering panels by inserting the product and keep tight flexible material. As soon as both panels are
closed, the applicator is ready for labeling.
6
5
2
6
5
2
þ
ý
Figure 13 Product in centering panel
!
Attention!
When the product (2) is inserted with excessive power it can be moved beyond the axle (6) of the appli-
cator. Following the labels can form loops on the product.
Depending on the setting, wrapping is triggered immediately or by a START signal. At this, the touch guard (4) is
closed and the label wrapped around the product.
Hold the product with both hands during wrapping.
After wrapping has finished, the touch guard is opened.
Remove the labeled product.
