background image

2

2

Service Manual 
for the following products

Type

Wrap-around 

applicator

WICON

Edition:

 09/2022 - 

Part No.

 9003822

Copyright

This documentation as well as translation hereof are property of cab Produkttechnik GmbH & Co. KG. 

The replication, conversion, duplication or divulgement of the whole manual or parts of it for other intentions than its original 
intended purpose demand the previous written authorization by cab. 

Trademark

Windows is a registered trademark of the Microsoft Corporation. 

Editor

Regarding questions or comments please contact cab Produkttechnik GmbH & Co. KG.

Topicality

Due to the constant further development of our products discrepancies between documentation and product can occur.

Please check www.cab.de for the latest update. 

Terms and conditions

Deliveries and performances are effected under the General conditions of sale of cab. 

Germany

cab Produkttechnik GmbH & Co KG

Karlsruhe
Phone +49 721 6626 0

www.cab.de

USA

cab Technology, Inc.

Chelmsford, MA
Phone +1 978 250 8321

www.cab.de/us

Taiwan

cab Technology Co., Ltd.

Taipei
Phone +886 (02) 8227 3966

www.cab.de/tw

Singapore

cab Singapore Pte. Ltd.

Singapore
Phone +65 6931 9099

www.cab.de/en

France

cab Technologies S.à.r.l.

Niedermodern
Phone +33 388 722501

www.cab.de/fr

Mexico

cab Technology, Inc.

Juárez
Phone +52 656 682 4301

www.cab.de/es

China

cab (Shanghai) Trading Co., Ltd.

Shanghai
Phone +86 (021) 6236 3161

www.cab.de/cn

South Africa

cab Technology (Pty) Ltd.

Randburg
Phone +27 11 886 3580

www.cab.de/za

Summary of Contents for WICON SQUIX



















Reviews: