background image

INSTRUCTION  MANUAL

Before operating the machine, read this manual carefully and scrupulously.
Failure to follow the directions contained therein, exempt the manufacturer from any 
liability.

The  machine  has  been  designed  and  manufactured  to  be  used  in  the  preparation    of 
slushes/sorbets and for the refrigeration of drinks.
The machine must be used exclusively within environments that do not present danger of 
explosions, and fire-fighting measures must be adhered to.

It  is  prohibited  to  use  the  machine  for  purposes  other  than  those  listed  in  this 
manual.

The appliance is of the type requiring supervision and must be installed in places 
where it is possible to be observed by trained personnel.

In  the  event  of  improper  use,  all  warranty  rights  will  be  forfeited  and  the 
manufacturer will accept no liability for injury or damage to persons and/or property.

Information about the Manufacturer is provided on the first and/or last page of the manual.

Before  carrying  out  any  operation  on  the  machine,  the  operators  and  specialised 
technicians shall carefully read the instructions contained in this manual. In case of doubts 
regarding the correct interpretation of the instructions, contact the Manufacturer to obtain 
the necessary clarifications.

The  Manufacturer  is  not  liable  for  any  damages  arising  from  non-compliance  with  this 
manual.

The instruction manual is an integral part of the product and it must always accompany it, 
even in the event of transfer to subsequent owners of the product

The machine must be installed in rooms with suitable fire extinguishers.

The instruction manual must be kept in the immediate vicinity of the Machine.
In case this manual is damaged or lost, it is necessary to immediately request another copy 
from the Manufacturer or the authorised distributor of the country where the machine is 
used.

This appliance is not intended for use by persons (including children) with reduced physical, 
sensory or mental capabilities, or lack of experience and knowledge, unless they have had 
supervision or instructions for use of the appliance by a person responsible for their safety.

Never let children play with the appliance.

Cleaning and maintenance to be carried out by the user shall not be carried out by children.

The appliance can only be used by a person with adequate technical training for 
using the products and adequate knowledge of the health and safety regulations in 
force.

1

Summary of Contents for FM1




























Reviews: