![background image](http://html1.mh-extra.com/html/cab/fm1/fm1_instruction-manual_3155729012.webp)
DAILY CLEANING OPERATION
Replacing parts:
1)
Replace gasket. Be sure seal is tight with no
gaps against
back of machine. Seal is best
when starting at bottom +
pressing with thumbs
on each side towards the top;
2)
Replace auger.
3)
Replace bowl. Slide on and press against
gasket.
Remove spout and separate parts in following order:
1)
Pin
2)
Handle
3)
Tap pin
4)
Tap spring
Wash spout parts in warm water and disinfectant.
Then
lubricate Tap.
Using thumbs, press on both legs until they
snap in place. Replace lid.
ATTENTION:
WHEN USING A MILK BASED
PRODUCT, THOROUGHLY CLEAN EVERY
DAY. PERIODICALLY CLEAN UNDER
O-
RING ON TAP.
3
4
1
2
1
1
Summary of Contents for FM1
