background image

17

Licenses

6.1  Declaration of Incorporation

 

cab Produkttechnik  
GmbH & Co KG 
Wilhelm-Schickard-Str. 14 
D-76131 Karlsruhe 
Germany

Declaration of Incorporation

We declare herewith that the following „partly completed machinery“ as a result of design, 
construction and the version put in circulation complies with the essential requirements of the 
Directive 2006/42/EC on machinery:

Annex I, Article  1.1.2, 1.1.3, 1.1.5, 1.1.6, 1.2.1, 1.3.2, 1.5.2, 1.5.8, 1.6.3, 1.7

In the event of any alteration which has not been approved by us being made to any device as 
designated below, this statement shall thereby be made invalid.

Device:

Tube Applicator

Type:

AXON 2

Applied EU Regulations:

Applied Standards:

Directive 2006/42/EC on machinery

• 

EN ISO 12100:2010

• 

EN ISO 13849-1:2015

• 

EN 349:1993+A1:2008

• 

EN 60950-1:2006 
+A11:2009+A12:2011+A1:2
010+A2:2013

Other Relevant Directives:

• 

Directive 2014/30/EU relating to electromagnetic compatibility

• 

Directive 2011/65/EU on the restriction of the use of certain hazardous substances in 
electrical and electronic equipment

Person authorized to compile the technical file:

Erwin Fascher 
Am Unterwege 18/20 
99610 Sömmerda

Signed for, and on behalf of the Manufacturer:

cab Produkttechnik Sömmerda 
Gesellschaft für Computer- 
und Automationsbausteine mbH 
99610 Sömmerda

Sömmerda, 14.09.2019

Erwin Fascher 
Managing Director

The product must not be put into service until the final machinery into which it is to be incorporated 

has been declared in conformity with the provisions of the Directive on machinery.

The documents according annex VII part B from the incomplete machinery are created and will 
commit to state agencies on request in electronic kinds.

Summary of Contents for AXON 2



















Reviews: