CAB Apollo 4, Operator'S Manual

Page: 58 / 118

58 cab - Produkttechnik GmbH / Tharo Systems, Inc.
Set Date
The "Set date" parameter allows you to change the system date of the
Apollo 4 .
The date format shown depends on the selected "Country" parameter.
Regardless of the format, the order of data to be changed (day - month - year)
always follows the same routine as shown below. (Figure 9 l)
The date range available is from January 1, 1970, to December 31, 2069.
If an invalid date entry is made, the display shows "Invalid input!"
After pressing the key the parameter may be set again.
Date changes in the software will only influence the date on the printout but not
affect the system date as stored in the setup.
The current field to be changed is flashing in the display.
10 Set date
11 Set time
Day Month
Year
Confirmation
*
*
*
*
*
*
Set date
xx.12.xxxx
Set date
xx.01.xxxx
Set date
xx.xx.2069
Set date
xx.xx.1970
Set date
31.xx.xxxx
Set date
01.xx.xxxx
Set date
xx.xx.xxxx Yes
Set date
xx.xx.xxxx No
*
*
*
Fig. 9 l Set system date
9 Printer info