43
No. Error pattern
Possible error cause
Troubleshooting
5
electrostatic charge
Install an external
ionizing blower.
6
Application height not correct
Readjust the stopper
Product too soft and flexible
Clamp the product if
possible.
Fix the product on the
supports
In the basic position, pads are not aligned parallel to
each other
Align the pad precisely
using the setting tool for
pad assembly
7
Value for the parameter
Lock time
too small.
Increase the value for
the parameter
Lock time
and thus delay the pliers
opening.
Throttle valve (2.03)
on the cylinder 'flag'
too closed for closing
the pads.
Set the throttle valve
(2.03) to the specified
value according to the test
report.
Open further if necessary.