CA.MI O2-easy, Instruction Manual

Page: 16 / 96

Do not touch the device with wet hands and never let the device come into
contact with liquids.
If the device is used by children and/or incapable persons, they must always
be closely supervised by an adult with full mental faculties.
Store and use the device in environments protected against atmospheric
agents and away from any heat sources.
Any repair operations must exclusively be carried out by
Manufacturer/Distributor Technical Service or by a technical service
authorized by the manufacturer using original spare parts. Failure to comply
with the above listed rules may compromise the safety of the device.
This device must be used exclusively for the purpose for which it was
designed as described in this manual.
If the device is not used for an extended period of time, it is advisable to
remove the batteries.
Using the device in ambient conditions different from those indicated in this
manual may compromise its safety and parameters.
This device can also be used on children older than 3 years, provided that
there is a normal size-weight / age ratio of the limb where it’s applied.
10
11
12
13
14
15
16
17
Significant levels of dysfunctional hemoglobin (such as carbonyl -
hemoglobin or methemoglobin).
Intravascular dyes such as indocyanine green or methylene blue.
SpO2 measurements may be negatively affected where there is too much
ambient light. Cover the sensor if necessary (for example, with a surgical
towel).
Excessive patient movement.
High-frequency electrosurgical interference and defibrillators.
Venous pulsations.
Placement of a sensor on an extremity with a blood pressure cuff, arterial
catheter, or intravascular line.
The patient has hypotension, severe vasoconstriction, severe anemia, or
hypothermia.
The patient is in cardiac arrest or is in shock.
1
2
3
4
5
6
7
8
9
WARNING!
Below are the possible conditions / uses that can cause a
misreading or inaccurate measurement of the device:
EN EN
29 30