Copyright © 2011 Shenzhen C2S Technology Co., Ltd. All rights reserved.
Entry: when object move into the area, device generate alarm events
Exit: When object move out the area, device generate alarm event
X=Longitude value
Y= Latitude Value
R= Radius length, unit is Meter.
6.2 Configuration by GPRS Commands:
Details please check” FL-2000G GPRS Air Traffic communication Protocol”
Note:
-
Not all functions are available in GPRS command configuration.
-
Configurator and SMS are the basic configuration methods for device.
7. SMS Command List
SMS commands are used to identify FL-2000G current state, possible configuration errors,
perform reset, set parameters, switch on/off outputs, etc.
SMS command should be sent along with module access password. The factory default password
is:1234
SMS structure is as follows:
*<password>*<command>#
Example for getting Google Map link:
*1234*P#
All available SMS command list as following:
Command
Type
Command Name
Functionality
Response
Configuration
Commands
Gxxxxx
Setup Server SMS Modem NO.
Yes
A*B*C
Seutp User A/B/C authorization NO.
yes
D
Setup Call Center Service NO.
yes
E
Modify Access Password
yes
V
Recover Factory Setting
yes
SPD:xxx
Setup speed Limit
yes
GMT+/-xxx
Setup Device SMS data Time
yes
GPRS:
Setup GPRS Parameters
yes
ITV
Setup Time-based update interval
yes
ITVOFF
Switch Off Time-based Data report
yes
AVON
Switch ON Data report when ACC Off
yes
AVOFF
Switch Off Data report when ACC Off
yes
VM
Setup Voice listen-in Call Back telNo.
yes
FD:
Setup Distance Report
yes
