C2G 29510, User Manual

Page: 10 / 62

IR External Sensor Kit
1. External IR Blaster Sensor (Transmitter)
2. External IR Receiver Sensor
3. Multi - mode Stand
4. Metal Plate
5. Screws
IR Sensor Assembly
Step 1. Pass the plug of the IR sensor through the bracket.
Step 2. Put the IR sensor on the bracket.
Step 3. Attach the IR sensor with the bracket into the multi - mode stand.
Step 4. Use a double sided adhesive tape to stick the magnetic metal plate to the bottom of the multi - mode stand.
Step 5. Remove the protective sticker from the magnetic metal plate, and attach the metal plate with the IR sensor on the metal wall.
Step 6. Or, you can use the supplied screws instead of the magnetic metal plate to mount the IR sensor with the multi - mode stand.
IR Sensor Installation:
You can distinguish the IR transceiver and IR receiver from the different icons by referring to above the photos.
To control a display or device on the display end of from the source end of the installation follow the steps below.
Step 1. Connect the supplied IR receiver to the port labeled IR IN on the HDBaseT transmitter unit.
Step 2. Connect the supplied IR transmitter to the port labeled IR OUT on the HDBaseT receiver unit.
To control a source device on the source end of from the display end of the installation follow the steps below.
Step 1. Connect the supplied IR transmitter to the port labeled IR OUT on the HDBaseT transmitter unit.
Step 2. Connect the supplied IR receiver to the port labeled IR IN on the HDBaseT receiver unit.
IR Sensor Installation (US)
9
1. 2. 3. 4. 5.
1. 2. 3. 4. 5. 6.