ENGINEERING MANUAL • Approved Document No. DFU5010020 Rev 4 • Page 20 of 48
CAST XFP 32 ZONE ANALOGUE ADDRESSABLE FIRE ALARM PANEL
A detailed description of the functions available at access level 3 can be found below.
DISPLAY FIRE EVENTS
This function is only available if there are active fire conditions on the system.
Enter AL3 (4444) > Display Fire Events.
If available, press the Accept
4
button and a window similar to the one below will appear:
Pressing the
5
and
6
buttons will scroll the display through all active fire conditions. More detailed
information can be viewed by pressing the panel’s More Information button.
DISPLAY FAULT EVENTS
This function is only available if there are active faults on the system.
Enter AL3 (4444) > Display Fault Events.
If available, press the Accept
4
button and a window similar to the one below will appear:
Pressing the
5
and
6
buttons will scroll the display through all active faults. More detailed information
can be viewed by pressing the panel’s More Information button.
DISPLAY DISABLEMENTS
This function is only available when there are active disablements on the system.
Enter AL3 (4444) > Display Disablements.
If available, press the Accept
4
button and a window similar to the one below will appear:
Pressing the
5
and
6
buttons will scroll the display through all active disablements.
DISPLAY ZONES IN TEST
This function is only available if one or more zones are being tested.
Enter AL3 (4444) > Display Zones in Test.
If available, press the Accept
4
button and a window similar to the one below will appear:
Pressing the
5
and
6
buttons will scroll the display through all zones currently in test.
Last Zone: 1:North Stairs
:Fire!
1 Zone
Zone 1: Ground Floor
There are faults on this zone
Zone 1: Shop floor
On: This Panel: Is Disabled
Zone 1: North Stairs
Is On Test
