C-SCOPE Newforce R1, Operating Instructions Manual

Page: 11 / 27

10
PIN - PT ON
This turns Audio Discrimination ON for Pin Point Mode. This gives a continuous pitch
change across the entire ID range. IE a low tone for iron and a corresponding increase in
pitch for more valuable metals.
MOTION OFF
This turns Audio Discrimination OFF for Motion Mode.
MOTION ON
This turns Audio Discrimination ON for Motion Mode. In this mode bad signals such as Iron
will give a low tone. Good signals will give the normal tone.
NOTE : No tone will be heard if the object has been rejected by the ID.
TIP! Best results will be obtained in this mode if Silent Search is On.
SILENT SEARCH
DISCRIM DISCRIM OFF
SENSITIVITY SIL SEARCH ON
AUDIO MODE
PROGRAMS
SET UP BACK
Silent search will suppress the background tone set by the TUNE setting. In this mode audio
will only be heard if there is buried object. The rest of the time the audio will be silent. Use
the MENU/SCROLL control to highlight the desired option, ON or OFF, and then press the
ENTER button. NOTE: Adjusting the TUNE level will automatically turn Silent Search off.
OFF
Turns Silent Search OFF. In this mode, a constant background tone will be heard. The level
of this tone is set by the SENSITIVITY - TUNE option.
ON
Turns Silent Search ON. In this mode, no background tone is heard.
MODE
DISCRIM DISCRIM ANALOG
SENSITIVITY SIL SEARCH DIGITAL
AUDIO MODE
PROGRAMS
SET UP BACK
This function alters the way in which the audio tone is generated. It only affects normal
Motion search mode. Use the MENU/SCROLL control to highlight the desired option, then
press the ENTER button.
ANALOG