6
INTRODUCTION
To protect your investment complete both sections of the enclosed guarantee card and return the reply
paid portion to C-Scope (UK only).
This is particularly important in order to obtain the free
second year parts guarantee.
Please retain the original packing box. In the event that your detector
should ever require to be serviced, this package will be most suitable for postal protection.
C-Scope detectors are recognised as the finest detectors available. They are designed with lasting
quality, high technology, and above all, value for money. The only way to realise this value is to carefully
study and understand this instruction manual. You will then be able to obtain all the advantages designed
into your detector. It is also strongly recommended that you experiment with the detector's operation in
air using various test samples, in order to learn to identify and understand the detector's capabilities and
responses. Always remember that becoming a good metal detectorist is like becoming a good
photographer or fisherman, that is, although it is an advantage to buy the best equipment, having bought
it, patience and hours of practice are needed to become proficient.
ASSEMBLY
For Normal Use
Open the carton and remove the upper stem and control box assembly. Remove lower stem and head.
Attach the search head to the lower stem using the fittings provided. Insert the lower stem into the upper
stem. Rotate the lower stem and search head to wrap the head cable around the stem. Adjust for the
desired length then adjust the length so that the stem securing bolt can be fitted through the stems.
Tighten the stem bolt. Slacken the handle securing bolt and adjust the handle to the desired position,
retighten the handle securing bolt. Secure the head cable to the lower stem using the self gripping tapes
provided.
For Diving
The CS7 is waterproof to a depth of 75m, (250 feet). Its pulse induction design makes it ideal for
underwater use.
IMPORTANT: always employ safe diving methods and do not belt mount the
control box when diving. The cables could become entangled with submerged objects and make
it difficult to jettison the detector and impede the diver in any attempt to resurface quickly.
The
set up is similar to that described above except that the stem is set as short as possible without the
search head detecting any of your diving equipment. The search head should be set so that it is parallel
to the sea, river or lake bed. Special care should be taken to ensure that the search head cable is
wound tightly around the stem close to the control box.
For Belt Mounting
When searching on the land the control box can be removed from the handle and attached to a purpose
made belt. This removes any significant amount of weight from the handle allowing prolonged use
without fatigue. The control box simply slides off of the handle by pulling the unit away from the search
head towards the armrest. Remember to unwind enough search head cable to allow comfortable
sweeping of the detector.
