14
Tips for Scanning
1.
Place the document to be scanned on a flat surface.
2.
Hold the pen just like holding a common pen. When
the scanning trigger pin is pressed (lightly) towards
the paper the scanning light will turn on. Without
rushing it, start moving the pen along the text line as
soon as the scan light is lit up. The scanning process
will go on until the trigger pin is released.
3.
Ensure the angle between the tip and the surface is
in the range of 70-90°, to enable the scanning light to
turn on and to get high-quality images.
4.
To ensure a complete recognition, place the tip of the
scan pen at the location about half a word in front of
the first word of the text when starting scanning, and
lift up the pen at the location about half a word after
the last word when finishing scanning.
5.
During the scanning process, you may scan the text
from right to left or from left to right.
6.
The scan pen can only recognise one text line at a
