manualshive.com logo in svg

C.P.Bourg BM-e, Operator'S Manual

Discover the C.P. Bourg BM-e, a robust and versatile booklet maker designed for precision and efficiency. Enhance your operation with the essential Operator's Manual. Get detailed guidance and maximize your machine's capabilities. Download the manual for free directly from manualshive.com to ensure optimal usage and maintenance.

Share
Download
background image

Operator manual

Page 9 - 67

Initial version : 11/08
Lastest revision : -

6. PREVENTIVE MAINTENANCE

For the BME:

Switch off the machine.
Open the upper cover and the doors.

Daily maintenance

Remove the metal parts (stitches) from clinchers by pushing on the handle 3 times. If you 

1. 

do not do it there is a risk of poor stitching or jam.

Empty the waste bin. If you do not do there is a risk of machine stop with the error 

2. 

message  “waste bin full”. Lift up to pull the bin.

Note:

 it is possible to empty the waste bin during the running of the machine. 

The machine will stop if the bin is not back after 50 cycles

Summary of Contents for BM-e

















































































Reviews:

No comments

Related manuals for BM-e

Brands by name

Popular brands

Load more brands