Operator manual
Page 9 - 61
Initial version : 11/08
Lastest revision : 02/10
5.4.2 BM-e adjustment in RUN mode
This menu gives an overview and allows parameters adjustment while machine is running.
Press the BM-e button to access to the setting parameters.
Four areas for adjustments are available:
- AGR area for paper format and stitching.
- PA area for folding.
- TR format for trimming.
- CV area for conveyor.
This buttons are used as described below:
Press this button to reset the counter conveyor value and force the offset of a
booklet.
Conveyor forced advance:
This command can also be activated by the pedal (if present).
Activation and deactivation of the folding (and so of the trimmer).
When this function is deactivated, the next set will come out in the upper receiving
tray.
Activation and deactivation of the trimmer.
When this function is deactivated, the next set will come out on the
conveyor but not trimmed.
AGR
PA
TR
CV
