C.P.Bourg BB3001, Operator'S Manual

Page: 28 / 51

• Milling motor will automatically start if jogger is not in upper position. There is a time out on
the milling motor rotation.
• When jogger is in upper position, the operator will have to make a choice:
• If operator ask for the motor to run ( notching without milling) the motor will
immediately start and there will be no time out on the motor rotation ( unless the
operator ask for the motor to stop , activate the emergency knob or open any cover).
• If the operator ask to not use the motor, the machine will check if the paper path is
clear from scoring tools.
• If paper path is clear from tools, the UI will indicate “binder ready”.
• If the notching tools are in the paper path, the binder will ready after the
indexation tools (a few seconds).
Operator Manual
Page 9 - 28
Initial issue: 12/00
Latest revision: 11/01