C.P.Bourg BB3001, Operator'S Manual

Page: 19 / 51

Settings
1. Remove the transparent cover from the front panel.
2. Rotate the center knob in the arrow direction (i.e., clockwise) to set the time. The present
time can be set in 1-minute units. For example 3:50 as shown in the figure. Do not rotate
the knob counterclockwise.
3. Two time setting brackets are provided: ON (gold) and OFF (silver). Be sure to use the
correct bracket and securely insert it in the groove of the dial.
4. Alternately set the ON and OFF time setting brackets.
5. After setting the time, reattach the transparent cover to the front panel.
Operation
6. Firmly insert the ON/OFF time setting bracket to the desired time setting groove. However,
do not insert it in a groove within ± 15 minutes distance from the dial groove that indicates
the present time.
7. After the time setting bracket is fixed and with the power and load connected to the timer,
rotate the knob in the arrow direction. Turn the dial one complete rotation to check if the
control output is turned ON/OFF in accordance wit the setting of the time setting bracket on
the dial.
8. Rotate the knob in the arrow direction and set the desired time according to step 2.
Operator Manual
Page 9 - 19
Initial issue: 12/00
Latest revision: 11/01
24
50
4
0
30
20
1
0
60
1
2
3
4
5
6
7
8
9
10
11
12
13
14
1
5
1
6
1
7
18
19
20
21
22
23 ON
PO
WE
R
ON
AUT
O
OF
F
OF
F
3 o'clock
50 minutes