C.P.Bourg BB3001, Operator'S Manual

Page: 24 / 51

Squaring of the covers:
Compensation for covers not cut exactly square is provided for by
moving right side guide (1) askew by means of knob (2).
Before adjusting (2), verify that the guide is unlocked to prevent
bows or warps.
After the adjustment, lock the knob (2).
Cover picking and front cover separators:
• If the suction cups on the left extend beyond the width of the cover, you must place the
plastic studs (1) from the tool kit in the suction cups.
• According to cover material, one more plastic stud (1) may be required in the suction
cup situed in the middle of the front edge as well.
• Vacuum is continuously adjustable by pot (5).
• Adjust the position and number of the front cover separators (4) only if necessary for
optimum cover separation.
• Use knobs (2) to move the separators (4).
• Use the knob (3) to adjust the air flow.
Operator Manual
Page 9 - 24
Initial issue: 12/00
Latest revision: 11/01
1
2
4
3
2
1
0
2
1
2
3
4
5 6
7
8
9
10