C-Nav C-NaviGator III, User Manual

Page: 33 / 121

C-NaviGator III User Manual
Revision 2 Page 33 of 121 9/27/2013
All of the C-NaviGator III active are listed below Menu / Settings / Serial Ports .
In the example above, Port 3
is set to “C-Nav3050”. Additional device status,
settings and control information are available for each port when selected.
Network Virtual Ports
This screen shows the
network virtual port summary
and allows the operator to
configure network
connections. Press the
New
button to create a new
network device connection.
Use the
Settings to show
details of an existing network
device connection. To copy
an existing configuration,
press the
Copy button.
Pressing Delete will remove a network device connection.
Logging
This screen allows the
operator to configure logging
of the data from an input
device to a USB mass storage
device. Each port can be
configured to log input data.
Select the
“Raw” port from the
list, and press the Settings
button. On the logging
settings dialog select the
frequency to create new files,
and the USB device to place
Note:
For C-Nav2000 and C-Nav2050, factory default communication settings are
19200 / 8 / None / 1
For C-Nav1010 and C-Nav3050, factory default communication settings are
57600 / 8 / None / 1