C-Nav C-NaviGator III, User Manual

Page: 56 / 121

C-NaviGator III User Manual
Revision 2 Page 56 of 121 9/27/2013
Output Control
Output data strings from the
C-Nav1010 can be chosen by
the setting s in this screen.
Some messages can be
output
“On Change”, thus
output at the Navigation Rate .
The Navigation Rate can be
set on the Solution Control
screen. Other strings can be
set to output every “Fixed”
number of seconds.
Port Configuration
COM1 and COM2 on the C-
Nav1010 receiver can be
configured here. Serial data
transfer parameters (
Baud
Rate and Parity ) should be set
to match that of the C-
NaviGator III port.
Firmware Update
The C-Nav1010
receiver’s
firmware can be installed from
this screen. Ensure that the
USB memory device is
installed. Press the
Select
Package button to search the
USB memory stick for
available firmware. Press
Update Firmware to upload
the new code into C-Nav1010
memory. Information