C-Nav 1000 R4, Installation Manual, Page: 38 / 82

SYSTEM CONFIGURATION AND SETTINGS Page 32
5. Select the sentence to modify the sentence send rate for using
∧ ∨
, and
press
ENTER
. A drop-down box is displayed,
with the send rates valid for the selected
sentence. See illustration to the right. Use
∧ ∨
to select the entry in the drop-down box that
best represents your desired rate, and then
press
ENTER
.
6. Repeat the procedure for each sentence that you wish to modify. Press
the
Apply and Exit
function key when done.
7. Press
ESC
to leave the Port Output Configuration view, and
ESC
again
to leave the I/O Configuration view.
6.10 Adjusting System Settings
The R4 Navigation System is fully operational once correctly mounted,
connected and configured, as have been described in this document.
However, it may be desired to adjust some system characteristics to the
operating environment and the preferences of the users of the system.
System settings that can be adjusted includes—among others—used
waypoint pass criterion, measurement units, cross-track error limit and
enabled and disabled alarms. For information on adjustable parameters
please refer to the Operator’s Manual, section “Adjusting Settings” in the
Reference chapter.