C-Nav 1000 R4, Installation Manual

Page: 3 / 82

i Copyright
The entire contents of this manual and its appendices, including any future
updates and modifications, shall remain the property of
C&C Technologies, Inc.
at all times. The contents must not, whether in its
original form or modified, be wholly or partly copied or reproduced, nor
used for any other purpose than the subject of this manual.
ii Disclaimer
While reasonable care has been exercised in the preparation of this manual,
C&C Technologies, Inc.
shall incur no liability whatsoever based on the
contents or lack of contents in the manual.
iii Caution
No single navigation aid should ever be relied upon as the exclusive means
for navigating a vessel. The navigator is responsible for checking all aids
available to confirm his position. Electronic aids are intended to assist, not
replace, the navigator.
iv Software
This manual reflects the capabilities of R4 Navigation Display software
version 5.0.
94
v Installation Manual Part Number and Revision
Part number
SAA
7000 109-142, revision G2.
This manual is a replacement for the earlier manual
SAA
7000 109-142 rev G.
vi Safety Instructions
Note the following compass safe distances:
Equipment Standard magnetic
compass
Steering magnetic
compass
R4 Display 0.6 m 0.3 m
R4 Navigation Sensor
(GPS and DGPS) 0.6 m 0.4 m
vii Contact Information
For installation, service and technical support please cont
act C-Nav Support:
cnav.support@cnavgps.com, or by phone: +1 (337) 210-0000