3. Once connection is established, the CM Window will display
‘
Connected‟.
If data transfer is
active, the circulating arrows
in the display will be illuminated. The modem will enter the
dormant mode to conserve power if the modem is in idle for some time.
Note : If Windows XP service pack 2 is installed in your computer, you must disable the firewall in
Window Security Center. Connection will fail if the Firewall is turned on. To access Windows Security
Center, right click on the Red Shield icon in the System Tray.
Ending a Data Session
1.
To end a Data Session, Click the '
button on the CM window. The Modem will proceed to
disconnect the modem from the network.
2.
When the modem is disconnected from the network, ‘
Disconnected‟
will be displayed on the
CM Window. You can close the CM window by clicking
, it is now safe to remove the
modem from your computer.
