5.BATTERY & FUSE REPLACEMENT
If "E!l"appears on display, it indicates that the battery
should be replaced.
Fuse rarely need replacement and blow almost always as
a result of operator's error.
To avoid electrical shock, Remove test leads before
opening battery or fuse cover.
To prevent fire, Install quick acting fuse with amp/ volt
rating shown:
F1 :FF 400mA H 600V F2:FF 10A H 600V
To replace fuse remove the 2 screws in the bottom of the
case. To replace battery remove the 1 screws of the battery
cover.Simply remove the old, and replace with a new one.
Be careful to observe battery polarity.
&warning
Before attempting to open the case,always be sure
that test leads have been disconnected from
measurement circuits. Close case and tighten
screws completely before using the meter to avoid
electrical shock hazard.
5.1 Accessories
1.0perator's instruction manual
1 pcs
2.Set of test leads
1 pcs
3.Gift box
1 pcs
4.9 volt battery
1 pcs
1 pcs
5.K-type temperature probe(P3400)
13
-
00-05-3420
Summary of Contents for 560
Page 4: ......
