background image

1.SAFETY 

INFORMATION

1.3 During use 

This multimeter has been designed according to IEC61010-1 

• Never exceed the protection limit values indicated in

concerning electronic measuring instruments with an 

specifications for each range of measurement.

overvoltage category (CAT  Ill) and pollution 2. 

• When the meter is linked to measurement circuit, do not

Follow all safety and operating instructions to ensure that the 

touch unused terminals.

meter is used safely and is kept in good operating condition. 

• Never use the meter to measure voltages that might

Full compliance with safety standards can be guaranteed only 

exceed 600Vabove earth ground in category Ill

with test leads supplied. If necessary, they must be replaced 

with the type specified in this manual. 

installations.

• When the value scale to be measured is unknown

1.1 Safety symbols 

beforehand, set the range selector at the highest

Important safety information, refer to the 

position.

operating manual. 

• Before rotating the range selector to change functions,

Dangerous voltage may be present 

disconnect test leads from the circuit under test.

!

Anti-garbage

• When carrying out measurements on TV or switching

power circuits always remember that there may be high

Double insulation (Protection class II).

amplitude voltages pulses 

at 

test points, which can

Fuse must be replaced with rating specified

damage the meter.

in the manual.

• Always is careful when working with voltages above 60V

de or 30V ac rms.  Keep fingers behind the probe barriers

1.2 Maintenance 

when making voltage measurements with test leads.

• Before opening the case, always disconnect test leads

• Never perform resistance measurements on live circuits

from all energized circuits.

• For continue protection against fire; replace fuse only

with the specified voltage and current ratings:

F1: FF 400mA  H 600V 

F2: FF 10A  H 600V 

• Never use the meter unless the back cover is in place

and fastened completely.

• Do not use abrasives or solvents on the meter. To clean

it using a damp cloth and mild detergent only

03 

04 

Reviews: